Recall Explorer

Every campaign, searchable

Search by campaign number, manufacturer, model or the words in a defect summary. Every row links back to the NHTSA filing it came from.

Quick filters

Your filtersKept as you move between pagesClear all

Manufacturer or make

Model

Model years from

Vehicle type

Component

Filed from

Complaint text

11,020 campaigns match (all years, all manufacturers)

Download CSV

Matching campaigns by monthNov 2024 to Oct 2026

Nov 2024May 2025Nov 2025May 2026Oct

Peak month102October 2025

20V-741

Nov 30, 2020

Mitsubishi

Rust prevention coating on the rear brake operating shafts could have been peeled off during the assembly process

Brakes

21,758

Part replacement

20V-740

Nov 30, 2020

Triumph Motorcycles America

Air could have entered the antilock brake system (ABS) modulator while the rear brake system was filled during production

Brakes

1,241

Not stated

20V-739

Nov 25, 2020

Paccar

Stability control brake relay may have the Spring Brake Modulating (SBM) Valve or the lift axle hose incorrectly connected

Stability and traction control

Inspection

20V-738

Nov 25, 2020

Triple E Recreational Vehicles

Galley overhead cabinet assembly is missing a heat shield over the cooktop

Equipment

Repair or modification

20V-737

Nov 25, 2020

Volkswagen

Wiring harness for the rear lights could be missing the anti-abrasion protection in the area of the spare wheel well

Electrical system

5,426

Repair or modification

20V-736

Nov 25, 2020

General Motors

Roof-rail air bag (RRAB) inflator end cap may detach from the inflator

Airbags

9,279

Part replacement

20V-735

Nov 25, 2020

General Motors

During general assembly, a repair involved removal of one or both front seats

Seats

Repair or modification

20V-734

Nov 25, 2020

Toyota

Breakaway pins within the steering column, designed to absorb energy and reduce injury during a crash, could have been damaged during production,…

Airbags

161

Part replacement

20V-733

Nov 25, 2020

Kibbi

Stove's saddle valve securing bolt may be overtightened, possibly damaging the O-ring seal and causing a continuous gas leak

Equipment

258

Repair or modification

20T-021

Nov 25, 2020

Bridgestone Americas Tire Operations

Recalled tires may have been manufactured with a small pinhole in the upper sidewall of the outboard side of the tire

Tires

1,827

Part replacement

Campaign 20V-741

Rust prevention coating on the rear brake operating shafts could have been peeled off during the assembly process

Manufacturer: Mitsubishi
Filed: November 30, 2020
Component: Brakes
Vehicles affected: 21,758
Remedy: Part replacement
Recall type: Vehicle

Defect summary

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2016 Outlander and Outlander Sport vehicles. The rust prevention coating on the rear brake operating shafts could have been peeled off during the assembly process. As a result, water entering the rear brake caliper boot may cause the parking brake operating shafts to corrode and possibly bind.

Consequence

If the parking brake operating shafts bind, the parking brakes may not engage or disengage fully. If the parking brakes do not engage properly, the vehicle could rollaway, increasing the risk of a crash.

Remedy

MMNA will notify owners, and dealers will replace the rear brake caliper assemblies, free of charge. Owner letters were mailed May 4, 2021. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-20-005.

Affected models

Mitsubishi Outlander 2016 Mitsubishi Outlander Sport 2016

View NHTSA filingOpen campaign page